TELESCOPE ACCESSORIES - REPLACEMENT PARTS - DEALERS - PRICE LIST - TECHNICAL SUPPORT
ORDERING within the USA - ORDERING INTERNATIONAL - ORDERING CUSTOM PARTS OR UNLISTED PARTS- USERS - NEW
 |
Losmandy's complete line of accessories allows you to do even more with your telescope. Tripods, piers, trays and adapter plates give you ultimate flexibility. Losmandy's tripods, adapters, motor covers and all accessories in the Losmandy line, are machined for lightness and rigidity from aluminum stock, then black anodized for a tough, corrosion free surface.
|
| PART NO. | PRICE | DESCRIPTION | |
|
|
|||
| 2.5 BW | $20.00 | ||
 Click for larger image |
 |
2.5 lb. weight, for use on DVDWS, DVWS, or WS systems. | |
|
|
|||
| 5.0 BW | $35.00 | ||
 Click for larger image |
|
5 lb. weight, for use on DVDWS, DVWS or WS systems. | |
|
|
|||
| 7 LB | $50.00 | ||
 Click for larger image |
|
7 lb. weight, for use on GM 8, G-9, G-11 and Titan mounts. | |
|
|
|||
| 11 LB | $75.00 | ||
 Click for larger image |
|
11 lb. weight, for use on GM 8, G-9, G-11 and Titan mounts. | |
|
|
|||
| 21 LB | $100.00 | ||
 Click for larger image |
|
21 lb. weight, for use on GM 8, G-9, G-11 and Titan mounts. | |
|
|
|||
| CWS-S | $100.00 | ||
 Click for larger image |
|
Short Counter Weight bar for use on lighter setups. For use on GM 8, G-9, G-11, G11GT. 8 inch length bar. | |
|
|
|||
| CWS-EX | $100.00 | ||
 Click for larger image |
|
Extension Bar for Counter Weight Bar. For use on GM 8, G-9, G-11, G11GT and Titan mounts. 6 inch extension. | |
|
|
|||
| MA | $100.00 | ||
 Click for larger image |
|
FHD / Meade field tripod adapter 6.0" diameter, 4.0" high. Inside machined to fit G-11 and GM 8 mounts. Tube has 1/2" thick bottom with 1/2" hole in center, posts for the electronics are mounted on the side. Also used on top of permanent piers. | |
|
|
|||
| MAL | $250.00 | ||
 Click for larger image |
|
FHD / Meade field tripod adapter (LARGE) 7" diameter, 4.0" high. Inside machined to fit G11GT, HGM Titan, HGM 200 and GM 200 mounts. Tube has 1/2" thick bottom with 1/2" hole in center and hole pattern to mount on Large Meade Field Tripod. Posts for the electronics are mounted on the side. Also used on top of permanent piers. | |
|
|
|||
| EX4 | $165.00 | ||
 Click for larger image |
|
4 inch Tripod Extension. Fits to the top of LW-Tripod, HD-Tripod, MA. | |
|
|
|||
| EX8 | $185.00 | ||
 Click for larger image |
|
8 inch Tripod Extension. Fits to the top of LW-Tripod, HD-Tripod, MA. | |
|
|
|||
| EX12 | $195.00 | ||
 Click for larger image |
|
12 inch Tripod Extension. Fits to the top of LW-Tripod, HD-Tripod, MA. | |
|
|
|||
| BP | $100.00 | ||
  Click photos for larger image |
|
HD TRIPOD FOOT Set (3). Fits G-11 (HD Tripod) adjustable tripod legs. 5" diameter for large surface contact. Dampens vibrations and glows for up to 15 hours. Set of 3. |
|
|
|
|||
| G-11 SPDV | $130.00 | ||
 Click for larger image |
|
Saddle Plate for GM 8, G-11 and Takahashi mounts. Accepts "D" and "V" series dovetail plates. Wt. 2 lbs. Size 1"x 4.0"x 8.0", 2 holes 3" sep., 2 holes 35mm sep. |
|
|
|
|||
| GM 8 SPDV | $55.00 | ||
 Click for larger image |
|
Saddle Plate for GM 8 and Takahashi mounts. Accepts "D" and "V" series dovetail plates. Wt. 14.5 oz. Size 1"x 4.0"x 4.0", 2 holes 3" sep., 2 holes 35mm sep. |
|
|
|
|||
| RAEXK | $295.00 | ||
 Click for larger image |
|
G11 RA Extension Kit is used to allow a Meridian Flip Through. This is done by adding an 1.5" to the RA body and also raising the Saddle Plate by 0.6" . With this kit the motors will not interfere when doing a Meridian Flip Through. An added feature with this kit is the ability to easily remove the DEC axis. This is useful when transporting the G11 to break down the G11 into lighter more manageable pieces. | |
|
|
|||
| RAEXT | $295.00 | ||
Click for larger image |
|
G11 RA Extension Dovetail. For use on the G11G and GM811G with the new design Tucked motors. This allows the separation of RA and DEC without any tools. | |
|
|
|||
| TAKADAPT | $20.00 | ||
 Click for larger image |
|
Takahashi Ring Adapter works with all Takahashi Clamshell Tube Rings and our DUP Series Plates. Mounting screws included.. | |
|
|
|||
| GEMINI 2 RETRO-FIT KIT | $1595.00 | ||
 Click for larger image |
|
Gemini 2 GOTO Servo System. DC servo motor based GOTO computerized positioning system. Retro-Fit Kit for: GM 8, G-11, HGM200 & G9 non GoTo equatorial mounts. Includes: Gemini 2 Main Control Unit,Touch Screen Hand Controller,
|
|
|
|
|||
| GEMINI 2 UPGRADE | $1095.00 | ||
|
Gemini 2 Main Control Unit and Touch Screen Hand Controller. To upgrade from Gemini 1 system. | ||
|
|
|||
| GCC GEM 2 | $25.00 | ||
 Click for larger image |
|
Gemini 2 to RS-232 Serial Computer Cable | |
|
|
|||
| ACDC | $79.00 | ||
 Click for larger image |
|
Gemini System Power Supply. Power adapter for use with AC. Universal Input: 100~240V 2.0A DC Output: 15DC regulated 4.3A |
|
|
|
|||
| PC | $10.00 | ||
 Click for larger image |
|
Power Cord. Cigarette Lighter Plug with 2.1mm Coax Plug Used on 492 Drive System and Gemini 2 Drive System |
|
|
|
|||
| GPS2 | $150.00 | ||
 Click for larger image |
|
GPS for Gemini 2 System. Plugs into port 1 on Gemini 2 system | |
|
|
|||
| PS | $300.00 | ||
 Click for larger image |
|
Polar Scope Finder. For GM 8, G-9 and G-11 mounts and the StarLapse system. Works in Northern or Southern Hemispheres. Direct reading. No calculations needed. Rotate polar scope and adjust alta-azimuth knobs. Includes self-contained, battery operated variable LED illuminator. Click HERE for a view of the reticle |
|
|
|
|||
| PSI | $85.00 | ||
  Click photos for larger image |
|
Polar Scope Illuminator. Our completely redesigned PSI will illuminate the alignment reticle of the PS polar scope with five different intensities in both constant and flashing modes. A microprocessor activates the red LED in the selected mode, then automatically turns off after two minutes. | |
|
|
|||
| HGM TPS | $400.00 | ||
 Click for larger image |
|
HGM Titan Polar Scope | |
|
|
|||
| POLEMASTER8 | $298.00 | ||
 Click for larger image |
|
PoleMaster manufactured by QHYCCD with Adapter to be used on GM811, GM8, or GM8G with Tucked Motors. Used with your Computer to quickly and easily Polar Align your Mount. Click here for QHYCCD WebPage with more detailed information. |
|
|
|
|||
| POLEMASTER11 | $313.00 | ||
 Click for larger image |
|
PoleMaster manufactured by QHYCCD with Adapter to be used on G11, G11GT, or GM8 non Tucked Motors. Used with your Computer to quickly and easily Polar Align your Mount. Click here for QHYCCD WebPage with more detailed information. |
|
|
|
|||
| POLEMASTER-T | $320.00 | ||
Click for larger image |
|
PoleMaster manufactured by QHYCCD with Adapter to be used on Titan. Used with your Computer to quickly and easily Polar Align your Mount. Click here for QHYCCD WebPage with more detailed information. |
|
|
|
|||
| AKS | $27.00 | Altitude Lock Knob Set (2) | |
 Click for larger image |
|
 Click for larger image |
|
|
|
|||
| TKS | $29.00 | ||
 Click for larger image |
|
Tripod knob set. Set (3). Machined aluminum knobs with stainless steel threaded shafts. For mounting equatorial head to tripod without tools. Fits GM 8 and G-11 mounts.  Click for larger image |
|
|
|
|||
| CKS | $125.00 | ||
 Click for larger image |
|
Clutch knob set (2). R.A. and DEC. with (3) handles @ 30 degrees. For GM 8, G-9 and G-11 mounts. Makes clutch knobs easier to use, and gives greater clutching range. | |
|
|
|||
| LCLS | $60.00 | ||
 Click for larger image |
|
Leg clamp lever set. Set (6). Lever type, indexable handles. Fits leg clamps, replacing round knobs. Indexable so they can be moved out of the way.
|
|
|
|
|||
| LCLS-FT | $30.00 | ||
 Click for larger image |
|
Leg clamp lever set. Set (3). Lever type, indexable handles. Set of 3 for Folding Tripod. Fits leg clamps, replacing round knobs. Indexable so they can be moved out of the way.
|
|
|
|
|||
| OPW-8-ORIG | $395.00 Without worm |
||
 Click for larger image |
Precision stainless steel bearing block & 7075 aluminum housing. All in-line motor/gearbox worm design. Preloaded bearings & screw adjust worm gear mesh. | ||
| $495.00 With high-precision worm |
|||
|
|
|||
| OPW-8 | $175.00 Without worm |
||
 Click for larger image |
Precision bearing blocks & 7075 aluminum housing. All in-line motor/gearbox worm design. Preloaded bearings & screw adjust worm gear mesh. | ||
| $275.00 With high-precision worm |
|||
|
|
|||
| OPW-11 | $175.00 Without worm |
||
 Click for larger image |
Precision bearing blocks & 7075 aluminum housing. All in-line motor/gearbox worm design. Preloaded bearings & screw adjust worm gear mesh. | ||
| $275.00 With high-precision worm |
|||
|
|
|||
| LW TRIPOD | $500.00 | ||
 Click for larger image |
|
GM 8 tripod with adjustable leg design. Height range from 26" to 44" All heights are from ground level to top of tripod, vertical. Carries up to 100 lbs. Fits GM 8, G-9, G-11 mounts. Wt. 15 lbs. |
|
|
|
|||
| LW TRIPOD CASE | $225.00 | ||
 Click for larger image |
|
Light Weight Tripod Case with Wheels |
|
|
|
|||
| FHD TRIPOD CASE | $255.00 | ||
Click for larger image |
|
Heavy Duty Folding Tripod Case with Wheels |
|
|
|
|||
| FHD-MA | $850.00 | ||
 Click for larger image |
|
Folding HD tripod with MA top for GM 8 & G-11 mountswith adjustable leg design. Height range from 33" to 52" All heights are from ground level to top of tripod, vertical. Carries up to 425 lbs. Tip to Tip legs retracted 34" Tip to Tip legs extended 53" Folded Completly Down with Legs Retracted 14" x 14" x 39" Wt. 35 lbs. |
|
|
|
|||
| FHD-MAL | $950.00 | ||
Click for larger image |
|
Folding HD tripod with MAL top for HGM Titan, HGM 200 and GM 200 mounts. With adjustable leg design. Height range from 33" to 52" All heights are from ground level to top of tripod, vertical. Carries up to 425 lbs. Wt. 36 lbs. |
|
|
|
|||
| MCS | $295.00 | ||
 |
|
Case Set for GM8, G11 and GM811. This is a Set of Two Cases; one Case for the RA and one Case for the DEC. Use of this case requires the RA to be separated from the DEC. Wt: 9 lbs. each case, without mount |
|
 |
Case shown with mount, mount is not included with case. | |
|
|
|
|||
| ALL SPECIFICATIONS MAY AND WILL CHANGE WITHOUT NOTICE | |||
|
Hollywood General Machining, Inc. For More Information Contact: Hollywood General Machining, Inc.
|
|||